MAKE FOLDER CON

NOW ANYONE CAN MAKE OR RENAME FOLDER WITH NAME CON IN JUST 1 SECOND.
ALL YOU HAVE TO DO IS INSERT ASCII VALUES.
WRITE CON & THAN PRESS KEY Alt255.
CHECK SCREEN SHOT.

COPY IMAGES FROM ORKUT ALBUMS

=> open album.
=> left click on the image & drag it to the address bar.



=> now you can save the image.



=>REGARDS:::bhtdgenius

How to change your Product ID in Windows XP

* Click Start > Run > and type in Regedit
* Browse to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\wpaevents


* In the right pane, right-click OOBETimer, and then click Modify & change it to "BHT D GENIUS"

• Click Change Product Key (at the bottom)
• TQBTQ-XQV3X-32RCG-VJ3C8-KWKW

Verify the change

• After the workstation restarts, click Start > Run
• Type in: "%systemroot%\system32\oobe\msoobe.exe /a" without the quotes.
• Make sure the dialog box says 'your copy of windows is already activated'

DOUBLE VISION

Double Vision: Parsing Images That Trick Our Brain.
Look at the picture above and you see Albert Einstein. Now walk across the room. Suddenly, he morphs into Marilyn Monroe. Our eyes pick up resolutions with both high spatial frequencies (sharp lines) and low ones (blurred shapes). By blending the high frequencies from one picture with the lows from another, Oliva creates images that change as a function of distance and time—allowing her to parse how humans absorb visual information.

OLD WOMAN OR YOUNG GIRL

hint: OLD WOMAN'S NOSE IS YOUNG GIRL'S CHIN

TO SEE & TRACE IP ADDRESSES

To see all ip addresses

cmd>netstat

to trace ip of sites

cmd>tracert [ip add or site name.com]

TO MAKE OPTIONS UNAVAILABLE

Run>gpedit.msc>user config>templates>system

HARDEST ILLUSION EVER 01

THIS IS PROBABLY THE HARDEST ILLUSION I HAVE EVER SEEN.AT THE VERY FIRST SIGHT YOU WILL SEE AN OLD MAN WITH IVY LEAVES AROUND HIM. BE PATIENT & GIVE SOMETIME, YOU EVENTUALLY SEE A COUPLE KISSING.

WHAT DO YOU SEE??

CONCENTRATE ON THE FOUR DOTS IN THE MIDDLE OF THE PICTURE FOR ABOUT 30 SEC. THEN CLOSE YOUR EYES & TILT YOUR HEAD BACK. KEEP THEM CLOSED, YOU WILL SEE A CIRCLE OF LIGHT, CONTINUE LOOKING AT THE CIRCLE. WHAT DO YOU SEE??

BYPASS MICROSOFT WINDOWS GENUINE VALIDATION

1) start > run > "regedit" (without the quotes of course)
2) go to the key:
HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\Windows NT\CurrentVersion\WPAEvents\OOBETimer
...and doubleclick on it. Then change some of the value data to BHT D GENIUS & close regedit.
3) go to start > run > "%systemroot%\system32\oobe\msoobe.exe /a"
4) the activation screen will come up, click on register over telephone, then click on CHANGE PRODUCT KEY, enter in this key: JG28K-H9Q7X-BH6W4-3PDCQ-6XBFJ.

ACCESSING INFORMATION ON THE HARD DISK

When you turn on the host machine, enter the CMOS setup menu (usually you have to press F2, or DEL, or CTRL+ALT+S during the boot sequence) and go to STANDARD CMOS SETUP, and set the channel to which you have put the hard disk as TYPE=Auto, MODE=AUTO, then SAVE & EXIT SETUP. Now you have access to the hard disk.

HACKING BIOS

At command prompt type debug
you will get a - prompt where you can type the fallowing
(* means hit enter)

A *
MOV AX,0 *
MOV AX,CX *
OUT 70,AL *
MOV AX,0 *
OUT 71,AL *
INC CX *
CMP CX,100 *
JB 103 *
INT 20 *
* just hit enter on this line
G *
Q *

FASTEST WAY TO INSTALL WMP11 IN NON GENUINE VERSION OF XP

GO TO C:\Documents and Settings\All Users\Application Data

After u have clicked the validate button, the setup will generate a folder called Windows Genuine Advantage. Delete the folder as fast as u can before the validation process is finished. U might need to try 2 or 3 times.

Then, u can enjoy wmp 11.

OPTICAL or ILLUSION

How to find open ports on a computer

1. To display all open ports, open DOS command, type netstat and press Enter.
2. To list all listening ports, use netstat -an |find /i "listening" command.
3. To see what ports your computer actually communicates with, use netstat -an |find /i "established"
4. To find specified open port, use find switch. For example, to find if the port 3389 is open or not, do netstat -an |find /i "3389".
5. You can use PULIST from the Windows Resource Kit to find which process is using a specified port. For example, pulist |find /i "4125" may display

Process PID User
mad.exe 4125 Chicagotech/blin

PARALLEL

SKY LAND

Change MAC value

LAC>prop>config>adv>set value

How to Validate Windows XP

How to Validate Windows XP In The Easiest Way Ever -

1) Right click your desktop and select new text document.
2) Open that document and paste the following info in quotes:


Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"CurrentBuild"="1.511.1 () (Obsolete data - do not use)"
"ProductId"="55274-640-1011873-23081"
"DigitalProductId"=hex:a4,00,00,00,03,00,00,00,35, 35,32,37,34,2d,36,34,30,2d,\
31,30,31,31,38,37,33,2d,32,33,30,38,31,00,2e,00,00 ,00,41,32,32,2d,30,30,30,\
30,31,00,00,00,00,00,00,00,86,56,4e,4c,21,1b,2b,6a ,a3,78,8e,8f,98,5c,00,00,\
00,00,00,00,dd,da,47,41,cc,6b,06,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,38,31,30,32,36,00 ,00,00,00,00,00,00,b5,16,\
00,00,83,83,1f,38,f8,01,00,00,f5,1c,00,00,00,00,00 ,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,66,e5,70,f3
"LicenseInfo"=hex:33,b7,21,c1,e5,e7,cd,4b,fd,7c,c6 ,35,51,fd,52,57,17,86,3e,18,\
d3,f4,8c,8e,35,32,7b,d1,43,8d,61,38,60,a4,ca,55,c9 ,9a,35,17,46,7a,4f,91,fc,\
4a,d9,db,64,5c,c4,e2,0f,34,f3,ea

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\WPAEvents]
"OOBETimer"=hex:ff,d5,71,d6,8b,6a,8d,6f,d5,33,93,f d


3) In notepad click then .
4) For file type in the save dialog box select "all files" and for the filename type in .reg or whatever you want. It doesn't matter as long as it has the .reg extension.
5) Click save.
6) Double click the file thats now on your desktop.
7) It will ask you "are you sure ?"
Tell It Yes